Tools

- Concentrated degreaser and wash that cleans grime, oil and greases gently - Safe on all surfaces

- Xtreme chain lube is formulated for long-distance and extreme off-road conditions - MFR bonds to metal surfaces and resists build-Up and tackiness, in addition to shedding water

Professional quality T-Handle star-shaped wrench built for speed, efficiency, leverage and a perfect fit. - Carefully selected combination of Chrome Vanadium and S-2 tool steels - Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless - Sliding T-handle creates increased leverage and multiple access positions

Professional quality T-Handle hex wrench built for speed, efficiency, leverage and a perfect fit. - Carefully selected combination of Chrome Vanadium and S-2 tool steels - Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless - Machined, chamfered tips allow easier insertion into hex fittings - Integrated “Strip-Gripper” twisted hex that makes removal of most bolts with stripped or oversized hexes fast and easy - Sliding T-handle creates increased leverage and multiple access positions

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus

Few experiences are worse than losing a critical part during an installation or repair. Often times you spend more time trying to locate the part than the job itself! This is why Pedro's offers its Magnetic Parts Tray. The six-inch diameter bowl features an extra-powerful magnet and bright yellow color keeping small parts safe and easy to access.

- Used to install fork dust seals

- 5 DART plugs for use with the Stan's NoTubes DART tool

Includes two rotating brushes, two sponges and two wicking pads already installed in a composite cartridge, ready to snap into the CM-25 Professional Chain Scrubber (sold separately.

- Reamer extension for use on the HTR-1 tool set - Increases depth on 2-piece reamer/facers (1", 1-1/8", 1-1/4") to 27mm - Designed for deep-insertion headset cups (Chris King Steelset). Sold individually

Also called a sleeping hub, the Dummy Hub slides into rear dropouts and replaces the rear wheel for chain cleaning and transport. The DH-1 works with all derailleur and 1/8" chain. The unique design allows the bike to be shifted and works with open dropout and thru-axle frames up to 12mm.

The Park FR-6 Freewheel Remover fits most 4-notch BMX and singlespeed freewheels. It can be held with a wrench or vise and its narrow profile allows use without removal of cones and locknuts.

Park's Crank and Bottom Bracket Wrench is perfect for working on old-style bottom brackets. The HCW-5 is a dual-sided lockring hook spanner, featuring a three-prong side and a single hook side for different style lockrings.

Park's Hydraulic Brake Piston Press is used to set or reset the piston(s) inside hydraulic disc brake calipers during installation, maintenance and repair. Just push it into the caliper to wedge the piston into place. It's made of tough tool steel with a comfortable and oversize rubber handle for a great grip.

The MT-10, 20, 30 and 40 are high quality folding take-along tools that feature forged aluminum side plates, a mix of hardened and plated tools, and smooth ergonomic operation.

The TRY-1 Parts and Beverage Tray is twelve inches in diameter, looks great on the workbench and will carefully hold anything from derailleurs to tallboy cans to pint glasses. It has a tacky surface coating that will keep objects from sliding around and can easily switch from business to party by placing your favorite beverage on its no-slip surface.

If you have a bike with disc brakes, you'll want Park's Rotor Truing Fork. It allows you to gently adjust bent and damaged disc-brake rotors. It's made from high-quality steel and features 2 laser-cut slots for precise adjustments and a vinyl handle for comfort and control.

Get the most from your Bontrager Switch Lever thru axle system. Product details - Original equipment replacement lever for Bontrager Switch Flip thru axles - Can be kept inside the thru axle or left off the bike to save weight - Lever is held securely by internal O-ring on the thru axle

• HD hardened steel construction

The Sunlite Shimano Freewheel Remover w/Guide fits the lockring on Shimano cassettes. Its hardened steel construction will last longer than your cassettes.

Sunlite's Sport Pedal Wrench is a double-ended wrench that fits any pedal size. The long handle gives you leverage, the rubber handle gives you a solid grip and the offset protects your knuckles.

- 2 tools in one: Chain Whip/Pedal Wrench - Sprocket remover chain whip with built in lockring spanner - Rubber-coated non-slip handle

- Pad/rotor alignment tool, helps set up pad gap on all Hayes brakes

- Fits all 16-notch x 44mm external bearing bottom bracket cups and updated design also fits 16-notch x 44mm disc brake lockrings and Shimano TL-FC24 and TL-FC25 adapters. - Updated design features a square 3/8" drive. Also works with Pedro's snap-channel Pro Socket Handle, 24mm socket or wrench, or in a bench vise. - Professional quality, precision sized for the perfect fit. Pedro's socket tools provide the professional quality, precision fit tools required to properly install, remove, and adjust modern drivetrain components. Pedro's designed each socket tool to fit perfectly protecting the component and ensuring simple and safe usage for the mechanic. The new External Bottom Bracket Socket, 16x44 is designed to work seamlessly with Pedro's snap-channel Pro Socket handle, with any 24mm socket/wrench, with any square 3/8" drive, or in a bench vise. Fits 16-notch x 44mm external bearing bottom bracket cups including Shimano BB80, BB5700, XT BB70, BB51, and previous external bearing threaded cups. Also fits many external Threaded types for Campagnolo, Chris King, FSA MegaExo, Hope, SRAM/Truvativ GXP, Race Face X-type, Surly, Wheels, and others. The new design will now also fits disc brake rotor lockrings with 16 external notches and Shimano TL-FC24 and TL-FC25 adapters. Backed by Pedro's lifetime warranty.

RockShox Glass Fiber Reinforced Nylon Non-Scratch O-Ring Pick Tools (Qty 5, for use on suspension products)

Removes all Shimano freewheels manufactured since 1985 (SD type)

Nickel plated tool - 15mm pedal wrench with PVC grip - 15mm box wrench - 6/8mm allen

- Specifically designed for quick and easy installation and removal of cranks including the Campagnolo Ultra-Torque. - Ergonomic dual-density screw driver handle. - Features extra long hex key and second ball-end. - Designed to stand up to the harsh conditions of professional use. 10mm crank bolts often require high torque and a special tool. Pedro's led the way with a tool up to these tasks. Our 10mm hex crank driver was specifically designed for quick-and-easy crank installation and removal including the Campagnolo Ultra-Torque. Features include an ergonomic dual-density screw driver handle for comfort and control, an extra long hex key for exceptional leverage, a second ball end for quick and easy installation or removal, and heat-treated S2 tool steel construction for the ultimate in strength and lasting performance. Also perfect for Mavic freehub body removal. Backed by Pedro's lifetime warranty.

Park Tool's professional-quality Snap Ring Pliers are made from forged, heat-treated cro-moly steel with a return spring and vinyl-dipped grips. The RP-3 has 1.3mm tips on bent nose blades for medium, external snap rings.

Park Tool's professional-quality Snap Ring Pliers are made from forged, heat-treated cro-moly steel with a return spring and vinyl-dipped grips. The RP-2 has 1.3mm tips on bent nose blades for medium, internal snap rings. The tips of the RP-2 open from 22mm down to 2mm (center to center).

Professional quality ring plier made from forged, heat-treated cro-moly steel with a return spring and vinyl dipped grips. The RP-5 has 1.7mm tips on straight blades for small, internal snap rings. The tips open from 22mm to 0 (tips touching).

The Handlebar Holder prevents the handlebars and front wheel from swinging to the side and banging into the frame when your bike is mounted in a repair stand. It fits handlebars up to 32mm and all frame tubes up to 50mm in diameter, so it works on almost any road or mountain bike and is sure to make every repair easier.

- Pocket sized chain tool that mates perfectly with Topeak ratchets and torque tools - Compatible with single and multispeed chains up to 12 speed including Capagnolo chains - Includes a 4/5mm allen key and a chain hook as well as a rubber clip to hold

This ergonomically designed grease gun delivers comfortable precision lubing. With one-hand operation and a long-reach tip, it's an easy, clean, quick way to get the slippery stuff where you want it. It screws onto all standard tubes of grease with 9/16-inch heads (sold separately).

- Shop-quality fiber reinforced nylon socket with center post for damage-free installation and removal of 16-notch BB cups - Center post helps to fix and stabilize the tool on to the BB cup - 1/2" drive is compatible with ratchet and torque wrenches - Compatibility: Shimano HTII 24mm and SRAM GXP 22/24mm - Size: 16-Notch x 44mm

Forged with Chrome Vanadium (CR-v) steel, precision ground, heat-treated, plated and polished. The PAW-6 opens to 24mm and features a laser engraved measurement scale and dipped blue handle for comfort.

Designed and built especially for singlespeed bikes, Park's SS-15 Single Speed Spanner is a durable forged-steel tool with a 15mm socket wrench for axle nuts, 15mm open-end wrench for pedals, a tire lever, and a bottle opener. It's just the right size to take along on rides and is great for wrenching in your shop too.

Checking your chain for wear is one of the simplest things any cyclist can do to maintain drivetrain performance and minimize maintenance costs. The Pedro's Chain Checker Plus II makes this task quick and easy offering a simple check of 50% and 75% chain wear. To ensure the maximum life from your chain and accuracy of measurement, the tool employs a three-point design which properly isolates pin wear from roller wear. Other two-point designs do not and can incorrectly indicate a worn chain, robbing the user of additional miles and money. The Chain Checker Plus II also includes a chain hook tool, perfect for simplifying chain removal and installation, and a chainring nut wrench, essential for removal and installation of chainrings. - Three point chain wear tool design properly isolates pin wear from roller wear - Includes a chain hook tool for simplifying chain removal and installation, and a chainring nut wrench for removal and installation of chainrings - Two chain wear indicators: 50% and 75% - Improved user instructions are laser etched on the tool

- 110 gram, 8-function shop quality folding tool with 1.5, 2, 2.5, 3, 4, 5 and 6mm hex wrenches plus T25 torx wrench. - Super strong composite body features new design with improved comfort, better leverage, and stay-tight bolt design. - Professional-grade tool steel wrenches feature superior anti-corrosion finish for unmatched lasting performance. Pedro's folding wrench sets are essential for the shop, event, ride, and at home. These folding wrench sets feature professional grade tool steel for strength, superior anti-corrosion finish for unmatched lasting performance, and body made of lightweight but super tough composite material. The new body features improved ergonomics, shaped to perfectly fit in your hand, allow easy access to each tool, and with extra length for better leverage and control. In addition, the new stay-tight bolt design keeps tool bits from loosening over time. Backed by Pedro's lifetime warranty.

- 120 gram, 7-function shop quality folding tool with 2.5, 3, 4, 5 and 6mm hex wrenches and flat-blade and #2 Phillips screwdrivers. - Super strong composite body features new design with improved comfort, increased leverage, and stay-tight bolt design. - Professional-grade tool steel wrenches feature superior anti-corrosion finish for unmatched lasting performance. Pedro's folding wrench sets are essential for the shop, event, ride, and at home. These folding wrench sets feature professional grade tool steel for strength, superior anti-corrosion finish for unmatched lasting performance, and body made of lightweight but super tough composite material. The new body features improved ergonomics, shaped to perfectly fit in your hand, allow easy access to each tool, and with extra length for better leverage and control. In addition, the new stay-tight bolt design keeps tool bits from loosening over time. Backed by Pedro's lifetime warranty.

- 122 gram, 7-function shop quality folding tool with 3, 4, 5 and 6mm hex wrenches and T10, T25, and T30 torx wrenches. - Super strong composite body features new design with improved comfort, better leverage, and stay-tight bolt design. - Professional-grade tool steel wrenches feature superior anti-corrosion finish for unmatched lasting performance. Pedro's folding wrench sets are essential for the shop, event, ride, and at home. These folding wrench sets feature professional grade tool steel for strength, superior anti-corrosion finish for unmatched lasting performance, and body made of lightweight but super tough composite material. The new body features improved ergonomics, shaped to perfectly fit in your hand, allow easy access to each tool, and with extra length for better leverage and control. In addition, the new stay-tight bolt design keeps tool bits from loosening over time. Backed by Pedro's lifetime warranty.

- Perfect companion for your Pedro's torque wrench - Bits made from premium S2 tool steel to ensure strength and lasting performance - Includes 16 hex and torx bits and 2 drive adapters in convenient holders - 50mm length bits in key sizes ensure component compatibility Pedro's Hex Bit Set II is designed to work with our torque wrenches offering an extensive range to handle most hex and torx needs. The set includes longer 50mm bits in key sizes to ensure compatibility and fit with all components where standard 25mm bits fall short. Bits are made from premium S2 tool steel for strength and lasting performance. Set includes: - Hex: 2, 2.5, 3, 4, 5, 6, & 8mm (25mm), 4 & 5mm (50mm) - Torx: T10, T15, T20, T25, & T30 (25mm), T25 & T30 (50mm) - Drive Adapters: 1/4-inch square to 1/4-inch hex & 1/4-inch hex to 1/4-inch square

This compact folding utility knife will quickly find a home in your pack, in the shop, or at home. Stainless and aluminum construction provide a balance of low weight and durability, ready for years of daily use. Easily operable with one hand the folding design locks open during use and folds to half its size, perfect in a pocket or clipped to a belt, always ready for the next job. Standard replaceable blades are easy to find at your local hardware store.

Portland Design Works' 3wrencho is a strong and versatile addition to your fixed gear, townie or workbench! Made of heat-treated steel for extra toughness, it's part tire lever, part 15mm wrench. Its strong nylon coating won't scratch rims, so you can pry as hard as you need to remove stubborn tires. Step on the 3wrencho for extra leverage to loosening axle nuts. May also be used to spread peanut butter, stir a drink, or open a letter. - Length: 114 mm (4.5") - Weight: 95 g (3.5 oz)

- Required to bleed Reverb 1x remotes - Compatible with Standard RockShox bleed kits - Included with remote upgrade kit and Reverb 1x post - Not compatible with SRAM brakes bleeding edge fitting

- Allen wrench set with ball ends for ease of use - Set includes 1.5, 2, 2.5, 3, 4, 5, and 6mm sizes

- 2-in-1 trailside disc brake repair tool - Features disc brake truing slots as well as a piston press/spreader in one convenient tool - Sandblasted chrome finish resists corrosion

Park Truing Stand parts to get truing stands back into tip-top working condition. The TS-2TA.3 installs quickly and easily into Park Tool Professional Truing Stands — including the TS-2.2 & TS-2 — for full compatibility with thru axle hubs.

The smartest, most convenient torque key now comes with enough bits to suit every need. Make sure those stem bolts are tight enough, and double check the torque on the seatpost bolt while you're at it. The Ritchey Bicycle Torque Key is an essential tool for those important bolts. Available with 4 or 5Nm options, this 6-bit set includes just about every bit you'll need for your bike, and a convenient holder to keep it all organized. - Hex 3/4/5mm - Torx T-20/25 - Phillips #1 - 4 or 5Nm max torque - Bit holder included

- Muc-Off's 3 most popular brushes in an handy pack - Claw brush ideal for chain, cassette and sprocket - Detailing brush ideal for tight areas such as suspension mounts or fork crowns - Soft washing brush ideal for your bike frame and wheels

Having the right tool for the job is essential when working on bicycles. Pedro's flat wrenches provide professional quality, precision fit wrenches required to properly install, remove, and adjust components. Pedro's headset flat wrenches are made from 3.2mm thick, precision laser cut, heat-treated tool steel for the ultimate in strength and long-lasting performance. Pedro's designed each flat wrench to fit perfectly, protecting the component and ensuring simple and safe usage for the mechanic. Each ergonomically designed flat wrench also features a single-ended design with cushioned grip to provide maximum leverage & comfort.

- Made from laser cut tool steel heat-treated for strength and lasting performance - New design features 24mm socket driver for use with Pedro's professional socket tools - 290mm length and ergonomic shape provide excellent leverage and comfort - Smaller lightweight design perfect for travel and the toolbox Pulling inspiration from our shop wrenches and using the same laser-cut tool steel construction, the Pro Travel Pedal Wrench makes quick work of tough pedals and now doubles as a socket driver for use with Pedro's professional socket tools. Features include a long 290mm length, cushioned plastic grip for control and comfort, heat-treated tool steel construction for strength and lasting performance, new 24mm socket driver, and a precision-cut 15mm wrench opening positioned at a 30 degree offset to improve mechanical advantage and wrench positioning. The smaller, lightweight, 215g design is perfect for travel and easy to fit in the toolbox.

- Easy-to-use cable stretcher with thumb lock for one-handed operation - Made from long-lasting and durable Chromoly steel - Ergonomic, easy-to-grip handle

- Hardened & nickel plated - Fits Shimano, SRAM GXP, Truvativ, RaceFace, FSA, and Campagnolo - Dual-compound handle

- 14mm Socket wrench - 8mm Hex wrench - Hardened steel construction - Dual-compound grip

Receiver cup for Wheels Mfg. sealed bearing extractors. Machined aluminum cup, anodized red with 60mm OD and 52mm ID. - 1/2-inch thru hole to fit over Wheels Mfg. 1/2-inch threaded rod press handles - This receiver cup is part of a system that requires additional pieces to function

Robust Bit-Check by Wera The Bit Holder allows for a quick overview of the Bit Set available inside, while ensuring they do not get lost. Its compact size makes it easy to transport, e.g. in your shirt pocket. The universal holder includes a strong magnet for the take-up of bits with 1/4" hexagon head drive. Bits can be inserted in a power screwdriver or used in the chuck of an electric drill. - Multi-component Bit-Check can be positioned upright for secure bit storage - Tough bits for universal use

- Accurate inexpensive gauge measures wear/elongation of most chains

Park Tool's professional-quality Snap Ring pliers are made from forged, heat-treated cro-moly steel with a return spring and vinyl dipped grips. The RP-1 has .9mm tips on straight blades for small, internal snap rings. The tips open from 22mm to 0 (tips touching).