27-Inch & 700c

The extra width of the Dillinger 5 provides flotation over loose snow additional grip while turning, accelerating or braking on ice and packed snow. Available in both studded and non-studded configurations. The studded version comes with 258 concave, aluminum carbide tip studs to provide extra bite and increased durability. - Carbide studs grip ice - Braced side lugs improve cornering - Tubeless Ready - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

Do you ride in a wide range of winter conditions? Dillinger is one of the best winter fat bike tires for mixed conditions, thanks to its balance of speed and traction to help you stick to your line without slowing you down. And with optional studs, you’ll never slip, slide, or lose control on ice. Details: - Fast-rolling center tread for carrying speed - Large, braced side lugs for predictable cornering performance - Available with 168 Large Concave Carbide Aluminum Studs, 168 Carbide Steel Studs, or a custom-studdable tread for tuning your own stud pattern - 60 TPI and 120 TPI casing options - Tubeless-ready for supple ride quality, more grip, and weight savings - We design 45NRTH tires for extreme winter cycling applications. We do not recommend using this product with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

- Elite Series convertible road disc hubs - Available in multiple axle configurations - Straight pull and J-bend spoke options - 6 bolt and Center Lock disc brake rotor options - Sealed bearings - Material: AL6061 Straight Pull Spoke/6-Bolt Disc: PCD-L: 36mm PCD-R: 36mm LTF-L: 27.75mm LTF-R: 15.25mm CTF-L: 22.25mm CTF-R: 34.75mm J-Bend Spoke/Centerlock Disc: PCD-L: 45mm PCD-R: 45mm LTF-L: 27.25mm LTF-R: 15.45mm CTF-L: 22.75mm CTF-R: 34.55mm

For "fun on one," look to Sun's Classic Unicycle. The steel frame sports a classic unicrown design and is built for excellent strength and reliability. Plus, the wheel spins on sealed bearings for durability, while the quick-release seatpost makes seat adjustments a snap. And speaking of seats, the Classic's offers top-notch comfort, balance, and bumpers to protect it, too.

From light winter trail riding to commuting, the Kahva allows you to carve your way through winter with concave carbide studs as well as single, double, and triple-siped lugs. - Siping on center and side lugs lets the Kahva conform to terrain for increased grip in any riding conditions - Concave carbide studs provide traction in the iciest conditions - 252 carbide aluminum studs - Directional lugs provide low rolling resistance while offering excellent braking traction - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

Ultra-versatile helmet that is light, cool, and sleek with the added protection of WaveCel advanced helmet technology and the convenience of magnetic light mounts. If you're going to get just one helmet, make it this one Whether your finish line is on the race course or at your front door, Bontrager's Circuit WaveCel delivers the right performance, comfort, and tech to be your go-to helmet for any ride. It's equipped with features any rider will appreciate on any terrain, like WaveCel technology, a BOA Fit System for superior comfort and security, and the Blendr mount system for easy light and camera integration. WaveCel is a collapsible cellular structure that lines the inside of the helmet. This Bontrager-exclusive technology disrupts the safety standards the industry has accepted for over 30 years. Product details - WaveCel advanced helmet technology - BOA Fit System lets you easily secure and adjust your fit with one hand - Blendr magnetic mount system easily integrates a GoPro camera and Bontrager lights - Made of 50% recycled EPS material - FlatStrap semi-fixed strap dividers lay flush and move fore and aft for a perfect fit - Soft, comfortable, moisture-wicking, and washable helmet pads - Reflective elements on the back of the helmet offer enhanced visibility - Crash Replacement Guarantee provides free replacement if your helmet is impacted in the first year of ownership

An off-road helmet with WaveCel technology that balances comfort and performance for trail riders who value safety. - WaveCel advanced helmet technology - Virginia Tech 5 STAR safety rating - BOA® Fit system lets you easily secure and adjust your helmet with one hand - Adjustable visor offers multiple coverage options - LockDown dividers make helmet strap management clean and easy to adjust - Soft, comfortable, and moisture-wicking washable helmet pads

Versatile and confidence inspiring, the Gravdal securely navigates through harsh winter conditions with concave carbide studs for added traction in icy conditions. - Siping creates a more conforming lug for added traction - Concave carbide studs provide traction in the iciest conditions - Reflective strip on sidewall makes you more visible when riding in low-light conditions - Fits most bikes with cantilever or disc brakes

Park Tool offers premium-quality reamers for nearly any bicycle standard. The reamers below are designed to quickly, accurately, and precisely ream headtubes when used with Park's Head Tube Reamer (HTR), ensuring a perfect headset fit and prfoessional-quality bicycle build. Choose the correct reamer for your application using the following information: - 751.2: This reamer is sized to 30.1mm. This allows a 0.1mm interference fit when pressing the 30.2mm headset of the “Euro” one-inch standard. - 754.2: This reamer is sized to 33.9mm. The allows a 0.1mm interference fit when pressing the 34.0mm headset of the 1-1/8" standard. - 788: This reamer is sized to 43.95mm. It reams head tubes to accept “internal” headset cups with 44.05 - 44.10mm O.D. (1-1/8 ZS standard). It is used with Park Tool's 690-XL Facing Cutter and 750 Centering Cone. - 738: This reamer is sized to 52.1mm. It is used to ream head tubes using the 1-1/2" integrated headset standard. It is used with Park Tool's 690-XL Facing Cutter and 750.2 Centering Cone Adapter. - 789: This reamer is sized to 55.95mm. It is used to ream head tubes to accept “internal” headset cups with 56.00–56.10mm O.D. (1-1/2 ZS standard). It is used with Park Tool's 690-XXL Facing Cutter and #750 Centering Cone Adaptor. - 799: This reamer is sized to 47mm. It is used for cutting the lower head tube on frames using an IS47 bearing for a 1-1/4" integrated headset. It cuts a 45-degree bearing set shoulder.

The Rampage rear wheel features a sealed bearing hub, 14mm axle and a Rampage double-walled rim. - Includes Stolen PVC rim strip - Hub/Brake Compatibility: Rim Brake - Wheel Size: 20" - ISO Diameter: 406 / 20" BMX - Valve: Schrader - Tire Type: Clincher - Rear Axle: 14mm Threaded x 110mm - Driver: 1-pc chromoly RHD or LHD - Driver Bearings: 6802 (x2), Verify bearing number on side of rubber seal - Driver Pawls: 3 Pawl - Driver Spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub Shell Bearings: 6902 (x2) Verify bearing number on side of rubber seal - Spokes: 183mm (3X) Black w/Black Brass nipples - Drilling: 36h only - Weight: 45.4 oz

- Replacement urban threadless forks - Accepts up to 40mm tire width - Chromoly construction - 1-1/8" steer tube - Size: 700C - Steerer Type: Threadless - Steerer Length: 300mm - Material: Chromoly - Offset: 45mm - Axle-to-Crown: 405mm - Race Diameter: 30mm - Axle: QR

Gates Carbon Drive CDX Front belt drive rings are crafted with 6061 aluminum and work well for high-mileage touring or rugged off-roading. - Constructed of 6061 aluminum - 11mm pitch - CDX CenterTrack belts, cogs and rings do not interchange with any part of a CDC/CDX MudPort system

Shimano's Deore Crankset features efficiency and fast shifting to let you make the most out of the trails. The smooth shifting rhythm allows you to maintain speed and acceleration over challenging terrain. Hollowtech II technology provides the best balance of stiffness, strength, weight, and rotating performance. Features: - Efficient power transfer - HOLLOWTECH II crank arm with 4-arm construction - Composite chainring - Optimized gear combinations and ratios for trail riding - Close step tooth profile for smooth shifting - Stable shifting performance in any suspension position - Single spike structure for stable shifting - Bottom Bracket compatibility: SM-BB52/BB-MT500-PA - Chain Line: 51,8

We designed Teravail tubeless tape for no-hassle installation. Its slight stretch allows the tape to easily conform to your rims. The translucent material shows you exactly where the tape makes contact. It's tacky enough to prevent shifting but easy to pull up if needed, and it won't leave residue on your rims. - Teravail Tubeless Tape comes in a variety of widths to fit almost any rim. - Teravail Tubeless Tape is available in a variety of widths and roll lengths. - Ten-meter length is enough for a single layer on approximately four wheels

- Patented carbon cords offer the tensile strength necessary to provide the smooth, greaseless, long-lasting ride advantage of a belt driven system (up to double the life of chains) - Belt is only compatible with Gates CDX CenterTrack cogs and sprockets Sizing - 108T = 1188mm - 111T = 1221mm - 113T = 1243mm - 115T = 1265mm - 118T = 1298mm - 120T = 1320mm - 122T = 1342mm - 125T = 1375mm - 132T = 1452mm - 250T (tandem) = 2000mm

Shimano's Deore XT Rear Derailleur uses cold-forged construction and cutting edge technology to deliver crisp shifting, real-world reliability, and trademark precision. Plus-type derailleurs use a lever-actuated clutch spring to prevent chain slap, reduce noise while on the trail, and improve chain engagement when riding over rough terrain. Sealed pulley bearings keep things spinning smoothly, and wide plate construction prevents the derailleur from getting clogged with mud and debris.

Dillinger 4 is a fast traction studded fat bike tire. The tightly spaced center tread rolls quickly, while taller, braced side lugs improve cornering in snowy conditions. Carefully positioned studs allow for railing icy, off-camber singletrack with confidence and control. - Braced side lugs for improved cornering - Directional center lugs for rolling speed and braking traction - Replacement studs and stud insertion tool sold separately - Custom studdable up to 252 studs - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss. - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

- Well-spaced and siped lugs help keep rolling resistance at a minimum even while running low air pressure - Large siping of lugs provides additional grip in sand, snow, and other unfavorable conditions - Staggered corner lugs provide a stable and predictable turning platform - Available in 120 TPI for a supple, obstacle conforming tire, or 30 TPI for a durable yet forgiving casing

- Super-light chain for use with 10-speed Campagnolo/Shimano/SRAM with Diamond Like Coating for extra durability - Use: Mountain/Road - Size: 1/2 x 11/128-inch - Width: 5.9mm - Weight: 253g - 116 links

Surly OD Bottom Brackets - Compatible with 24mm spindles - Moonlander BB fits a 100mm bottom bracket shell, but exterior width conforms to BB121 standard

The Wheels Mfg BB30 Outboard bottom bracket will give you all of the same benefits as their other Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in BB30 frames without the need for adapters. - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: BB30, Specialized Alloy OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 42mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 130g

The SURPASS from 100% is your ultimate choice for no compromise, all-in-one coverage. Featuring a Level 2 impact rating, this gear really does everything well—light enough for cross country, protective enough for downhill, and breathable enough for all your pedaling needs. - Rubberized ventilated outer skin - Strategically placed perimeter embossed foam padding with ventilation - Fully ventilated plastic protective cup with high impact absorption - Pre-curved chassis for attack position - Internal elastic flex joint maintains chassis compression during pedaling - Tacky silicone elastic webbing to prevent slippage - Thigh cinch for customizable fit and security - Forearm cinch for added security - Impacted Tested with Maximum Level 2 Protection

As a front lever for your Rival 1 set-up, or paired for single speed adventures, the new Rival brake lever features the same ErgoFit ergonomic design introduced on SRAM RED but delivered in a sleek, forged aluminum offer. SRAM Reach Adjust feature brings near universal fit for riders. - Weight: 260 grams per lever (no cables) - Lever Material: Aluminum - Finish: Black - Adjustment: Reach Adjust

- Standard threaded cartridges are 3/8" x 24tpi thread to fit any brand inflator - Law prohibits ORM-D materials from shipping by air - Box includes 20 CO2 cartridges

• Chromoly construction • V-brake mounts • I.S. disc mount • Fits bikes with 20-inch wheels • Steerer length: 250mm

Bontrager's Evoke Mountain Bike Shoe delivers all-around performance for the most rugged adventures. Equipped with a grippy Tachyon rubber sole and reinforced with GnarGuard, Evoke keeps you planted on and off the bike while refusing to yield to the nastiest of trail debris. - inForm Race last offers a slightly roomier, high-performance fit - A single BOA L6 dial for precision fit and easy micro-adjustments - Strong, synthetic perforated upper materials hold up to off-road rider demands - Durable GnarGuard rubberized coating protects against abrasions and other damage from trail debris - Nylon composite Bronze Series sole provides stiff yet walkable performance - Stiffness index: 6 of 14 - Tachyon rubber outsole allows great grip on any surface - Compatible with 2-bolt SPD-style cleats

Light and tight The Velocis Cycling Jersey delivers premium performance in a simple and elegant form-fitting aesthetic. Made from our best Profila fabrics, this jersey is enhanced by 37.5 technology, which uses body heat to evaporate moisture and keep you cool and dry. Product details - Profila Dry with Profila Cool inserts powered by 37.5 active particle technology - Full-length YKK zipper provides ventilation on long climbs and warm days - Three open back pockets provide convenient access to your ride needs - Rear zippered security pocket with audio routing on back makes for easy listening - Drop tail design covers your backside in riding positions for a cycling-specific fit - Fitted cut provides streamlined body fit for enhanced performance

A luxury cycling short that delivers comfortable performance during long, hard rides. A harder today for a stronger tomorrow The Velocis Short perfectly combines function and fashion so you can ride hard and suffer less. Attention to detail is at the core of this cycling short, with a dual-density chamois that delivers pure performance and great comfort even on your longest and hardest rides. Product details - Arcus inForm Chamois with an OverEasy constructed Aircell pad - PinchLess leg construction design is more comfortable and flattering - Clean-cut compression leg gripper - 9.5" (24cm) inseam - Fitted cut provides streamlined body fit for enhanced performance

The Hellbender70 bottom bracket utilizes a bearing made of 440C stainless steel, providing exceptional ride quality and reliability. The stainless steel bearing in the Hellbender 70 strikes a perfect balance between value and lasting performance. - 440C stainless steel bearings, dual lip seal, marine grease - Machined aluminum cups

The Hellbender 70 bottom bracket utilizes a bearing made of 440C stainless steel, providing exceptional ride quality and reliability. The stainless steel bearing in the Hellbender 70 strikes a perfect balance between value and lasting performance. - 440C stainless steel bearings, dual lip seal, marine grease - Machined aluminum cups