Accessories

No words needed. Just google "EX 471 Leogang World Cup". Let your muscles play on the uphills and switch to attack mode for the downhills. This is exactly what the DT Swiss Enduro rims are made for. Each rim is a piece of high precision engineering and, thanks to the extremely resistant alloy, the EX 471 can cope with the most demanding trails.

Product specs: - Size:24", 26" - Width:39mm - Bead width: 39mm - Inner bead width: 30mm - Section height: 27.5mm - Weight (26"): 760g - Sleeved or welded - Hole count: 32, 36

- Plastic spoke covers in a variety of colors - 300mm cut to fit length - 36 pieces - enough for one wheel - Increases visibility and demands attention

Tubeless setup made easy with valve stems designed to work as a system with Bontrager wheels, tires and rim strips The valves you need to upgrade to Tubeless These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Product details - To be used exclusively with Bontrager Tubeless Ready (TLR) wheels - Use only with Bontrager TLR rim strip with rectangular base - Required for Bontrager's Tubeless Ready (TLR) system setup - Removable valve core for easy sealant fill - Sold as singles

Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical. We've ridden them on all kinds of bikes from the Electric Queen to the Mr. Pink and we're in love. They are reliable, dang light and very reasonably priced. We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release lever and 12mm thru-axle endcaps are included. On all models we spec high-quality made in Japan stainless-steel sealed bearings. The splined freehubs have 28 points of engagement, the XD driver has 56. Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity. - Weight: 277g - Includes 12mm thru-axle end caps and quick release skewer - Drive Side Center To Flange 18.5mm - Non-Drive Center to Flange 34mm - Non-Drive Flange Diameter 58mm - Drive Side Flange Diameter 49mm

The Muc-Off Tubeless Rim tape is made from their proprietary performance material with a pressure-sensitive adhesive to provide just the right amount stretch whilst maintaining durability and strength needed to create a lasting airtight seal. Semi-transparent material makes locating the valve hole easy.

Tannus Armour Tubeless inserts are the result of years of top level multi-cell foam manufacturing mixed with extensive professional riding experience. At the heart of Tannus is the patented Aither Technology; a multi-cell foam compound that forms the structure of the Armour. The inserts are designed to displace small impacts while offering a spring-like rebound for a smooth yet playful ride. - 3% Faster than standard tubeless - Flexible sidewall stabilizing "Wings" for smoother ride quality, with 50% more vibration damping - 20mm of rim protection - Not a sealant sponge – keeps sealant where it belongs - Easy Installation (5 Minutes, No tools required) - 150g - About as much as a standard tube (a little lighter)

Replacement indicator chain for three speed Sturmey Archer hubs.

- Shell: 8mm flanged axle nut - Flanged

- Replacement adjustable nut for three-speed internal hubs.

Replacement Axle nuts for three speed Sturmey Archer hubs.

- Deep section Urban/Fixie, Track racing rim for strength and aerodynamics - Non-machined sidewalls for added style points

- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires - Durable 6069 aluminum with welded joint and reinforced spoke bed - BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build - Reinforced spoke bed, combined with the offset drilling of the asym design, builds into an incredibly durable wheel that brings added confidence to every ride.

V2 Tubeless valves are stronger, lighter, and even easier to use thanks to the machined aircraft grade 7075 aluminum and Muc-Off's new Tire Insert air ?ow system. The new design features six slots that are machined into the base of the valve stem, allows tubeless sealant ?uid and air to ?ow freely, even when running tubeless tire inserts. - 7075 Machined Aluminum valve stem and cap - Tire Insert air flow system keep air moving freely and compatible with most tire foam inserts - 4mm machined Allen Key slot for easy installation and removal - Includes Valve Core Removal Tool (integrated into spare alloy cap) - Supplied with various rubber bases to optimize fit with multiple rim types

The Rampage rear wheel features a sealed bearing hub, 14mm axle and a Rampage double-walled rim. - Includes Stolen PVC rim strip - Brake Compatibility: Rim Brake - Wheel Size: 20" - ISO Diameter: 406 / 20" BMX - Valve: Schrader - Tire Type: Clincher - Axle: 3/8" chromoly (Heat-treated) - Hardware: Steel (17mm wheel nuts) - Hub Shell Bearings: 6000 (x2) Verify bearing number on side of rubber seal - Spokes: 187mm (3X) Black w/ Black Brass nipples - Drilling: 36h only - Weight: 32.5 oz

Elite Series skewers for fat bike applications AL6061 alloy lever with CrMo axle Available for 135mm, 150mm, 170mm, and 190mm OLD spacing

Product specs: - 36 hole count - Front and rear specific - 28.5mm wide - Welded - 20", 24" - 395g front rim 392g rear rim - Also available in 24", black only

- AL6061 alloy tubeless Presta valve - Includes 2 O-rings, one standard profile and one aero profile, for an airtight seal on any rim - Removable valve core for installing sealant - Additional replacement valve cores sold separately - Sold individually

- Deep section Road racing, Triathlon, Commuting, Touring, Track racing, and Singlespeed rim for strength and aerodynamics - Hollow core aluminum with machined sidewalls for improved braking

- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

Wheel Conversion Caps for Zipp 77/177 Disc hubs. Converts your Zipp 77 or 177 hubs to nearly any frame standard.

- Wheel bearing kit front/rear - Bearing dimensions: 17 x 30 x 7mm - Material: steel - 2 pieces

Replacement Alloy XDR (XD-Road) Freehub Body, for all HEX Rear Hubs. Includes spacer ring to also allow the use of MTB cassettes. Compatible with: - All HEX J-Type, Straightpull, and Gravel rear wheels Not compatible with: - SPIKE/OOZY/SPOON hubs

We designed Teravail tubeless tape for no-hassle installation. Its slight stretch allows the tape to easily conform to your rims. The translucent material shows you exactly where the tape makes contact. It's tacky enough to prevent shifting but easy to pull up if needed, and it won't leave residue on your rims. - Teravail Tubeless Tape comes in a variety of widths to fit almost any rim. - Teravail Tubeless Tape is available in a variety of widths and roll lengths. - Ten-meter length is enough for a single layer on approximately four wheels

Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually

- 45mm deep aerodynamic carbon disc brake wheelset - Wind Tunnel Optimized rim profile, aerodynamic aluminum hubs, and USB ceramic bearings for optimal performance in all conditions - 2-Way Fit tubeless-ready rims with 19mm internal width, optimized for use with wider tires - G3 spoke lacing front and rear for maximum power transfer and braking performance - Black-on-black Dark Label graphics - Only 1520g per pair

Dependable Independence – Reliability, versatility, and simplicity are united in a hub. Thanks to the proven freehub Ratchet System, the 350 hub is a dependable partner for every adventure. The 36-tooth ratchets ensure direct power transmission. The sophisticated yet simple construction of the hub allows a low weight while providing outstanding rolling performance. Furthermore, it enables cyclists not only to maintain their freehub system without special tools but also to convert to the various standards. The intention behind the 350 was to create a dependable hub that supports cyclists in their independence. PRODUCT DETAILS: - A DEPENDABLE HUB The freehub Ratchet System makes the 350 the dependable partner for any ride - NO TOOL CONCEPT Plug-in hub construction allows for quick and tool-free maintenance - NEW ENDCAPS The new shape of the end caps facilitates disassembly and thus speeds up handling requiring disassembly - VARIETY The 350 hub is available for all common axle standards and for the various drivetrain systems. TECHNOLOGY: We believe in the art of engineering and strive for sophistication in the product development process. Our guiding idea is to constantly push barriers with our in-house developed technologies. LEGENDARY RELIABILITY: The patented freewheel system, which features high-precision star ratchets, guarantees top performance and reliability. The simultaneous engagement of the ratchet teeth makes the Ratchet System extremely reliable since the loads are distributed equally across a large contact surface.

After a long climb, the perfect trail lies ahead of your tires: flowy, dusty, varied, endless. Nothing holds you back from entering the All-Mountain thrills with the M 1900 Spline wheels. A rim developed with optimal balance of durability and weight offers efficient climbing characteristics as well as dent resistance on single trails. With experienced wheel building by hand, this wheel is a reliable partner to collect freewheeling moments in the mountains. - Intended use = XC and All-Mountain/Trail - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring

Surly Thru-Axles are low-profile, bolted Thru-Axles are specifically designed for use with Surly thru-axle compatible frames. Offered in several sizes, for both front and rear wheels. 12x142 Rear Thru Axle: - Fits: Midnight Special and MDS Dropout bikes including Instigator, Legacy Karate Monkey & Legacy Krampus. 12x142/148 Rear Thru Axle: - Designed for frames with Surly Gnot Boost spacing (145mm), capable of working with 142 or 148mm rear hubs - Fits: Karate Monkey, Krampus, Troll, Ogre, ECR 12x177 Rear Thru Axle: - Fits: Wednesday 12x197 Rear Thru Axle: - Fits: Ice Cream Truck, Big Fat Dummy 12x100 Front Thru Axle: - Fits: Midnight Special 15x110 Front Thru Axle: - Fits: Karate Monkey, Krampus 15x150 Front Thru Axle: - Fits: Wednesday, Ice Cream Truck, Big Fat Dummy

Build your singlespeed or fixie bike around Surly's Ultra New Roadie Rear Hub. This gorgeous hunk of aluminum has the capability you need and reliable sealed bearings, too! It sports threads for a track cog and lockring on one side and a freewheel on the other so you can decide how you want to roll. Plus, this hub's 130mm width fits most road frames and the hollow chromoly axle provides a flex-free ride as well as simple quick release skewer compatibility.