Saddles & Pads

With shaft and head formed from one continuous carbon fiber section, the K-Force Light SB0 seatpost is both light and strong. The K-Force Light SB0 features a zero-offset (in-line) clamp for a forward saddle position, with our forged alloy Minimal Top Clamp holding the saddle securely. - Forged alloy Minimal Top Clamp (MTC) - Increased setback for correct fit and saddle support - One-piece continuous carbon fiber construction - M5 chromoly and stainless steel hardware design - Zero Setback - Fits 7mm standard rails and 7x9mm oval rails - 185 grams

Dubbed 'Straggle-Check' frame bags, these bags are designed to fit both 700c and 650b Straggler and 700c Cross Check frames. Size up one size on your bag if you've got a 650b Straggler frame and voila, it fits. These are handmade by Revelate Designs in the U.S., made of Dimension Polyant VX 21 polyurethane coated fabric. It's durable, rip resistant, tightly woven and laminated to make it highly water resistant but not fully waterproof…. Revelate advises using stuff sacks inside (such as the one in which our bags are packaged) if you risk riding in extended downpours or underwater. Surly's Straggle-Check frame bags (as well as their mountain bags) are now using a ladder strap system, which allows greater flexibility in how you attach the bag to your frame. The ladder straps let you customize the fit and placement of the mounting straps so if you have some weird contraption clamped to your frame tubes like a chain keeper, cable pulley, or some trinket grandma gave you, it won't interfere with the mounting straps on the frame bag. They're also including foam bumpers for the mounting straps to minimize thread abrasion to the bag and attachment points Quality YKK brand water resistant zippers – with an improved, water resistant zipper 'garage' – control compartment access and help keep the weather out. Zippers are sewn with a stretch panel to relieve stress on the zipper as well. Stress even kills zippers. The large main compartment has a flexible divider inside, and there's a hydration port to make sure your whistle stays wet. There's also a compartment suitable for smaller items you'll access relatively often, like your map, phone, hard boiled eggs, uncontained pudding, marbles for playing marbles, your dugout, that ring you found that makes you disappear when you put it on, or whathaveyou. Frame bags such as this are light and reasonably voluminous. They are stable because they center weight low between your wheels and body, and they go places where racks and panniers are often troublesome, like singletrack. Note: due to the rough texture of the mounting straps, prolonged use may lead to scratched or worn paint. If you're worried about keeping everything looking pristine you probably ought to look for some other type of bag, or figure a way to protect the paint, such as duct tape, or tatting a top tube doily - for example.

- The FatBar Carbon is the ultimate DH race handlebar. - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.

An ideal handlebar for riding anything from all mountain to downhill, Renthal's FatBar Carbon handlebar combines a blend of strength, stiffness, shock absorption, and weight savings. - Uni-Directional carbon construction - Ride-tuned to provide an ideal combination of stiffness and shock absorption - Increased center section width for fine-tuned flex characteristics - Downhill and twin crown fork compatible - Permanent graphics, set-up grid and cut marks

- The Fatbar Lite Carbon 35 is the ultimate light-weight, trail-proof handlebar. - Designed for Trail, Enduro and XC riders and racers, the Fatbar Lite Carbon 35 is the clear market leader in terms of weight, strength, stiffness and most importantly, ‘rid

Campagnolo strives to always offer the best solutions, no matter what frame or tire the cyclist has chosen. As manufacturers begin to develop frames and fork designs that take advantage of the aerodynamic gains of direct mount brakes, the Campy Tech Lab has worked to make new Campagnolo Direct Mount brakes that can guarantee the Campagnolo quality and performance standards. Through the self-balancing design, this new braking system by Campagnolo provides a completely symmetric and efficient brake application. In addition, the extremely stiff structure of the new Campagnolo Direct Mount brakes ensures superior stopping power, whilst the design elements take inspiration from the aerodynamics of the brake and are enhanced by the new sealed structure of the brake levers themselves. In addition to pure performance, a great deal of attention was given to ease of use and adjustment. The goal was to guarantee that the Campagnolo brake would be both easier to fit and intuitive and simple to adjust compared to any model available. That was made possible through the stiff structure positioned in the rear part of the brake, enabling rapid fitting that does not require external brake boosters, even on the weakest chainstays.

Park's Dial Indicator Gauge Set mounts to their TS-2 or TS-2.2 Truing Stand (sold separately). The set makes it easy to view and correct a wheel's lateral and radial run-out within a tolerance of .01mm. Compared to going by the gap between the truing stand pointer and rim, having gauges that put a number on the clearance makes wheel truing easier and more accurate.

In conjunction with the EPS Power Unit, the Interface is the "thinking" center of EPS and is responsible for on board diagnostics, managing settings, converting analog signal from Ergo Levers to digital and sending it on to the Power Unit maintaining a dialogue with the Power Unit. - Has been updated to work with 12-speed cassette sprockets - The V4 version enables automatic shifting once a set gear inch ratio has been reached following the gear change - Wireless system to communicate with the MyCampy app via pc / notebook / tablet / smartphone (BTLE), allowing the user of the EPS groupset to personalize settings - 500mm cable length to Ergopower controls - 550mm cable length to EPS V4 power unit

The Campagnolo Chorus cassette offers cyclists even more versatility and greater choice and autonomy in terms of available gears. - Designed as the same width as 11-speed cassettes to maximize compatibility with wheels and frames - The two bigger sets of three in a single-block piece eliminate energy dispersion - Surface treatment increases durability and smoothness - Cassette Body Type: Campagnolo 10/11/12 Speed - Drivetrain Speeds: 12 - Color: Silver - Defined Color: Silver

Meet the new fail-safe for your tailgate, featuring padded protection for your most prized possession. With durable PVC tarpaulin and a micro-brushed inner lining, the FOX Overland pad is designed to keep your truck and bikes clean and secure. - Raised bumpers (reinforced with high-density foam) keep down tubes secured in place to minimize frame contact - Each pad comes with two strap extenders for eMTBs - Fully adjustable rear opening to maintain function of your backup camera and keep your tailgate handle accessible at all times - Durable PVC tarpaulin on the outside and a micro-brushed inner lining ensure your tailgate is protected from cosmetic damage - Every size of Overland features cinch straps to adjust the exact height and width of your truck’s tailgate

- The same performance as the high-end MT8 SL model at an attractive price - Equipped with a 1-finger HC aluminium lever blade - Suitable for mounting left or right

Shuttle Saver - Our new T2 pad is made to fit any shape of tailgate, and has an adjustable rear camera panel - both RF exclusive, patent pending features. Carry up to 6 bikes with no bike on bike crime with raised bumpers + downtube straps. Backup Plan - Exclusive to the T2 is the adjustable rear panel that allows for easy adaptation to any rear camera + handle position. Shape Shifter - Six adjustment straps along top edge of the installed pad provide a fit tailored to your tailgate’s shape - even curved! Just Say No - To bike on bike crime. The T2 features raised bumpers in the truck box that keep frame downtubes in place and secure, minimizing contact while shuttling. Specs - Construction: PVC tarpaulin with micro-brushed inner lining - Adjustment: Top edge adjustment, camera window adjustment - Other: Raised bike spacers and padding, hook-and-loop frame straps, lock loop Bike Capacity - Mid-Size Truck (Tacoma or similar): 5-bike - Full-Size Truck (Ford F-150, F-350 or similar): 6-bike

Salsa Cro Moto Grande Fork 29". - Disc only 29" rigid fork - Suspension corrected for 80mm travel fork - Maxle Included - Axle to Crown Length: 483 mm - Brake Mount (Fork): IS Disc Brake 160 - Crown Race: 40 - Front Axle: 15mm Thru x 100mm - Material: Chromoly Steel - Offset: 45 mm - Wheel Mount Center Offset (mm): 0 - Steerer Tube Length (mm): 260 mm - Weight: 1080 g

The king has returned to rule! The new JoeBlow Ace DX features an innovative three-stage design that achieves both high pressures and high volume in record time. Stage one opens both barrels for big volume to reach 60 psi with 30% less effort than standard floor pumps. Stage two uses the main barrel only for pressures up to 120 psi while stage three engages the small barrel to achieve an amazing 260 psi. Two tone padded handles, wide stable base and new 4” base mounted analog gauge make inflation easy. The new SmartHead DX1 automatically adjusts to fit Presta and Schrader valves without swapping parts and the lower profile air release button makes getting the right pressure easy. Includes ball and air bladder type inflation needles. - SmartHead DX1 full metal pump head w/ air release button & x-long hose - Gauge: 260 psi / 18 bar; 4” base mount analog - Base: Aluminum/Rubber - Barrel: Anodized aluminum - Handle: Oversize dual tone - Weight: 2.45 kg / 5.4 lb - Size: 74 x 28 x 22 cm/29.1” x 11” x 8.7”

A full-featured, waterproof urban-inspired pannier that overcomes limitations normally found with waterproof bags. Offers exceptional external load flexibility, a removeable internal organizer for a laptop, and a convenient external access zippered pocket for keys and/or phone. - OCEANWEAVE 600D reclaimed fishnet polyester with waterproof polyurethane coating. - HYDRACORE liner provides an exceptional IPX5 waterproof rating. - Rixen & Kaul VARIO 2 spring-loaded hooks immediately adjust from 6mm-16mm, without any need for tools. - Rixen & Kaul lower SLIDE-LOCK and FLIP-LOCK hold panniers firmly in place. - Intuitive waterproof roll-down closure system. - Removeable 14.2-inches x10.2-inches padded laptop/electronics sleeve/organizer. - External zippered pocket for keys/wallet, etc... - Keychain clip + Axiom keychain. - Compression/cargo straps provide exceptional load control and allow gear to be carried outside of the main cavity. Ideal for unplanned loads faced by commuters. - Strap control loops to protect against strap damage if straps are not secured. - Single daisy-chain tie-down strip for additional load attachment. - Ultra-visible three-way 3M triangle logos. - Ultra-stiff Polypropylene backing plate. - Front and rear light clips. - Carry handle. - D-Rings built in to hook attachment points for additional luggage tie-down, or for attaching your own shoulder strap. - Volume 22.6L / 1379 cu/in - Weight 935g / 2.06 lbs (incl. laptop sleeve and tablet sleeve) – (800g / 1.76 lbs without sleeve) - Dimensions 47x28.5x13.5cm / 18.5-inches x11.25-inches x5.25-inches - Pannier sold individually

Our Box Three tier delivers many of the same capabilities of its more famous siblings yet it's built upon a simpler platform. Cassettes are accessible at 11-46T or 11-50T and fashioned with steel spiders. The derailleur exploits our Limited Slip clutch technology without the Tri-pack features. Shift easily with a comparable mechanism, although you'll forgo the hinged clamp and die-cast structure. And lastly, string it all together with a Prime 9 chain but without extravagant coatings. If you're looking to bring your 2/3 by bike into the 21st century, then level up with this group!

Bontrager's Speed Concept Seatpost lets you get your aero fit dialed. Different offsets allow you to customize your riding position for superior ergonomics and aerodynamics, and the clamp is compatible with both standard and oversize saddle rails. This seatpost is compatible with 2014 Trek Speed Concept 9 Series bikes.

Replacement master cylinder lever assembly for Hayes hydraulic disc brakes.

Upgrade your road rig with Origin-8's Cromo-Lite II Road fork. It features full cromoly construction for a sublimely smooth ride.

SRAM's Red GXP BlackBox Bottom Bracket Cups are the premium choice for getting the most out of every pedal stroke. They feature ceramic bearings that drastically reduce drag on the crankset, meaning more of your power goes directly to the road. Plus, the ceramic bearings and stainless-steel races mean these cups are incredibly light and durable, too!

Make Every Escapade a Grand Slam Take your bike outings from mediocre to unforgettable with the Grand Slam 3-bike hitch rack. This simple hanging hitch rack sports essential, no-fuss features, including a base that tilts for hatch access, arms that fold for quick storage, and straight-forward assembly. Constructed from American-made steel, the Grand Slam is secure enough to transport a team of bikes to any destination. - Carries 3 bikes (35 lb./bike) - A Bike Beam may be required for frames without a horizontal top tube. - Hanging hitch rack tilts away for hatch access when unloaded. - Ratcheting bike hold downs accommodate a variety of bike sizes and frame types. - Arms fold up and down with ease for quick storage and easy loading. - American-made steel construction. - Fits 1.25" or 2" hitch receiver.

Give your little one a comfortable seat where they can enjoy the view as you pedal them around town. A 3-point safety harness with protective chest pad keeps them secure over bumps and through turns and an adjustable headrest allows for helmet clearance. The carrier mounts on an included alloy rear rack and has a quick release feature for easy on and off. - Quick release - Mounts on included alloy rear rack - Adjustable headrest for helmet clearance - Durable hi-impact polypropylene structure - Soft, washable, shock-absorbing seat pad - 3-point safety harness with protective chest pad - Two convenient in-seat storage compartments - Adjustable footrests w/straps - Grab bar w/padded grips - 40 lb weight limit - Brake Compatibility: Disc

We designed the Naughtvind Pants to protect you from winter’s harshest elements. Using our own experiences riding through Minnesota winters, we built these pants with a stretchy, breathable, wind- and water-resistant material. Fleece-lined thighs keep body heat in, while vents let you regulate temperature. Features such as reflective accents and an adjustable waist suit many types of riding and riders. Beat the cold with these winter cycling pants. - Bike-focused design with high rear waist and articulated knees for riding comfort - Made with recycled materials - Water- and wind-resistant shell material stretches as you move - Fleece-lined thigh offers protection from extreme wind and cold - Two ventilation areas for dumping excess heat - Adjustable waist for dialing in fit - Fits over bibs for easy layering - Reflective accents for safety - Adjustable ankle for boot-compatible fit SPECS: FEATURES: - Double-weave fabric provides the best combination of weather protection, breathability, and stretch - Black reflective material placed in key areas enhances your nighttime visibility - Minimal and secure webbing waist adjustment - Zipper and snap ankle closure fits over 45NRTH boots without creating excess bulk - Imported POCKETS: - Front pockets and zippered rear pockets with side access VENTILATION: - Zippered ventilation at the thighs and lower leg - SUGGESTED TEMP RANGE - 0°F (-18°C) to 25°F (-4°C) Comfort MATERIALS: - 88% Recycled Nylon, 12% Elastane - Exclusive of trims

We designed the Women’s Naughtvind Pants to protect you from winter’s harshest elements. Using our own experiences riding through Minnesota winters, we built these pants with a stretchy, breathable, wind- and water-resistant material. Fleece-lined thighs keep body heat in, while vents let you regulate temperature. Features such as reflective accents and an adjustable waist suit many types of riding and riders. Beat the cold with these winter cycling pants. - Bike-focused design with high rear waist and articulated knees for riding comfort - Made with recycled materials - Water- and wind-resistant shell material stretches as you move - Fleece-lined thigh offers protection from extreme wind and cold - Two ventilation areas for dumping excess heat - Adjustable waist for dialing in fit - Fits over bibs for easy layering - Reflective accents for safety - Adjustable ankle for boot-compatible fit - Available in Women’s (fitted) and Men’s (straighter) cuts

In keeping with its commitment to innovation, Ortlieb has just introduced another PVC-free line of products made of a polyurethane-coated polyester fabric. The base fabric of the products in the Free Line is coated with polyurethane in a manner that ensures lasting waterproof qualities. The result is a waterproof and durable canvas material that is as outstanding as the conventional Ortlieb canvas material when it comes to durability and service life. The PVC-free version of the proven Ortlieb Back-Roller was developed for cyclists and outdoor enthusiasts who would like to avoid PVC entirely. This rear pannier bag with a roll closure offers ultimate practicality for all of your bike tours and weekly grocery-shopping ventures, especially on account of its generous payload. Thanks to its waterproof exterior, easy-to-clean interior and shoulder-bag function, the Back-Roller Free is ideal for all who would like to use their bikes despite having things to carry. With the Quick-Lock2.1 system, the bags attach to any bike rack with a tube diameter of up to 16 mm. Larger hooks (e.g. for e-bikes) are available separately. - Classical rear pannier (pair) with roll closure - Made of PVC-free, PU-laminated polyester fabric - QL2.1 system for racks up to 16 mm - 20 mm hook available as separate accessory (e.g. for e-bikes) - Including reduction pieces for tube diameters 8, 10 and 12 mm; with anti-scratch function reducing abrasions on rack - Top QL hooks and lower sliding hook adjustable without requiring any tools - Lower hook rail made of two-component "hard-soft" synthetic reduces abrasions on carrier - Including integrated inner pocket and shoulder strap - Can be used individually (e.g. for shopping, sports, picnic) - Can be combined on the rack with Ortlieb Rack-Pack size 24L or 31L - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective Scotchlite reflector - Easy to clean inside

Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Silver level forks give you stiff steel upper tubes and TurnKey lockout. Features - New graphics package with E-MTB endorsement option (15x110mm) - TurnKey lockout gives 'on/off' control - Fits Tires up to 2.8" (15x110mm) - Fast Black finished 30mm steel upper tubes couple stiffness and lightweight with a premium look - Plush, highly tunable Solo Air spring - Disc brake compatible - Offset: 51mm (29-inches) - Steerer Diameter: 1.5-inch Tapered

The COSMO is the flagship model for stainless steel Tubus carriers. It has a wider cargo area, extreme carrying capacity, and a longer back for better tail light protection. - Weight: 680g or 24 oz. - Load Capacity is 40kg or 88 lbs. - Wheel size 26? or 700c

- Quarq D1 crank arm assembly - 8 bolt interface for use DZero DUB and DFour DUB power spiders

Complete tool kit for installing wheels manufacturing bottom brackets. Kit includes our new bottom bracket socket tool for installing our BB cups, along with new sealed bearing drifts for the following ID bearings: - 22mm - 24mm - 29mm - 30mm Bottom bracket press pro install kit includes: - UNC 48mm 16-notch socket x 1 - 22x37 drift 1/2" x 1 - 6806 OB 1/2" x 2 - 24x37 OB 1/2" x2 - 1/2" frame drift x 1 1/2-13 x 9. 7" - threaded rod unc x 1 44-48. 5mm - double 16-notch 1/2" socket x 1 - threaded handle x 2

Park's adjustable linkage shop clamp is found in more shops than any other professional level clamp. The 100-3C features solid cast aluminum construction and durable replaceable clamp covers. Clamp has reliefs on both jaws for cable routing. - Fits all generations of PRS-2, PRS-3, and PRS-4 stands, and PRS-5 stands manufactured before 6/96 - Fits bike frame tubes from 1" to 1-5/8" (25mm to 41mm) - The clamp jaws are nominally 4 inches (10cm) wide - Uses 468B jaw covers