Saddles & Pads

- Velo Wireless computer with AMPP 100 headlight and ViZ 100 rear light

- Battery tail lamp with reflector for rear rack - Compatible with 50mm, 80mm and 19mm (center mount) - Waterproof construct IPX4 - Built-in wide angle reflectors - Meets StVZO, RKF and Danish lamp standards - Meets StVZO Z, BS, UN IVA, UN IA and CPSC reflector standards - Low battery indicator - Tool-free battery replacement

- Eten-I rounds out the lower end of the KS internally routed dropper post spectrum with a post that is perfect for new riders just getting used to the idea of on-the-fly seat height adjustment or more experienced riders looking for a value-priced solution. - Eten-I uses the same head and cartridge as the Eten Remote but moves the cable interface to the bottom of the post for compatibility with frames accommodating internally routed cables.

- Includes: Footwear Shield, Bike Shoe Cleaner, Foam Fresh, premium Shoe Brush, Microfibre cloth and storage tote bag - Bike Shoe Cleaner removes dirt, grime and odors - Footwear Shield is a spray on water repellant - Foam Fresh helps break down hard to remove dirt and grime

Keep those shoes clean! Our Muc-Off Premium Bike Shoe Cleaner makes it easy to get rid of dirt, grime and odors from the outer material of your MTB, gravel or road cycling shoes. It’s a non-toxic, yet super powerful cleaner that’s not only safe for you and your shoes but the environment too. Look fresh, ride rad! It’s a non-toxic, yet high performing neutral cleaner that is effective at cleaning a range of grime and stains without affecting the breathability of materials. Formulated without any harsh chemicals or abrasives to ensure it is safe to use on the wide range of materials used in shoes. It has been tested on over 60+ shoes made from a very wide variety of materials, including: Natural fabrics, synthetic fabrics, technical fabrics, suede, nubuck, leather and other fabrics. Features: - Biodegradable, environmentally friendly, water-based formula - Powerful cleaning performance - Doesn’t compromise breathability - Suitable and safe - specifically designed for bike shoes - Safe on technical fabrics, suede, nubuck, leather and other fabrics* - Perfect for preparing your footwear for fresh waterproofing/re-proofer treatments such as Muc-Off Premium Footwear Shield - Handy sized 250ml spray bottle

- Creates a dry ceramic coating for increased durability and performance in dry condition - Excels in dry and dusty conditions - Biodegradable - Integral UV tracer dye and UV torch to aid accurate application and ensure total protection

- Creates a ceramic coating for incredible durability and long distance performance - Provides ultra low friction for ultimate drivetrain efficiency - Waterproof qualities excelling in wet conditions - 95% biodegradable

- Highly versatile dry weather chain lubricant - Deep penetrating, durable P.T.F.E. chain lubricant - Hold up to extreme conditions which can destroy ordinary lubes - Comfort bottle with pipette system for ease of use and application

Bring your shoes back to life! The Muc-Off Premium Footwear Shield is an epic environmentally-friendly spray-on treatment that’ll dial up the water repellency levels of your shoes, giving your feet the ultimate protection for your next ride or adventure, no matter how gnarly it gets. The Footwear Shield works in a very similar way to the Rain Shield DWR to create a durable water repellent on the surface of the shoe. We use an advanced polymer technology as the basis of our footwear shield. We then combine this with a range of silicone and wax emulsions to ensure our product is as versatile as possible and can be used on a range of different materials. Additionally, this blend of repellents provides the best solution to getting a repellent finish when air-dried. *Check your shoe manufacturer care instructions before use. - Suitable and safe to use - specifically designed for bike shoes - Advanced polymer technology offers excellent performance without using harmful chemicals - Water-based formula - Safe on technical fabrics, suede, nubuck, leather and other fabrics - Added conditioning additives for leather, nubuck and suede - Hydrophobic - offers excellent water repellency - Improves resistance to dirt and oil - Maximizes breathability - PFC-free/non-hazardous - Effective without heat activation - Handy sized 250ml spray bottle

- Ultra durable, long distance chain lubricant - Excel in long distance wet or muddy conditions - It penetrates deep into the chain links core to provide long lasting lubrication and total protection - Extreme pressure additives coat every part of the link to provide silky smooth gear change and ultra efficient drivetrain

Fits: - 2017 - 2019 Sight Alloy and Sight Carbon - 2019 Fluid FS MKIII - 2018 Optic Carbon - 2016 - 2017 Sasquatch FAT - 2017 Torrent Alloy FS - 2016 - 2017 Torrent HT Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0169

Fit Kit SET724.R contains all the parts to mount an Old Man Mountain rack to the rigid fork of a road or gravel bike with a 12 mm thru axle.. This kit includes: - 12 x 134 mm thru axle with M12 x 1.5 mm thread pitch - Spacers to reduce the length to 128 mm - A pair of mounting pucks, for bikes without upper eyelets. - Ultra strong and UV stable Panduit Zip Ties - Clear protective tape, for underneath the pucks and Zip Ties - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame If mounting on a Fox Gravel Fork, please also order 377-1240. We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

- Create an air tight seal for BST rims - Can also be used as a lightweight rim strip for any rim

- Tire levers set made of glass fibre reinforced plastic - Safely lever the tires off of the rim without damaging the rim - 1/4" hexagon mounting in the tire lever allow the use of a 1/4" bit - With valve core tool and deflater

The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life and simplifying maintenance. Enjoy smooth operation, fast bearing replacement, and no more creaking. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: Cannondale BB30A - Bottom Bracket Shell Width: 73mm - Bottom Bracket Shell I.D.: 42mm - Over Bearing Width: 91mm in 73mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 44mm x 16 notch

- Slim, strong multi-tool with 11 functions for common bike repairs - All bits are ED-coated and corrosion-resistant - Magnets keep all bits in place and secure - Ball detent swivel head tested to over 40Nm of torque - Same bits as 8-Bit System and EnCase System multi-tools - Six bits with eleven functions: 2, 2.5, 3, 4, 5, 6, and 8mm hex; flat head #3.5 and Phillips #2 screwdrivers; and T10 and T25 Torx-compatible bits

- Perfect finishing touch to a bike built - 7075-T6 aluminum - M5 x 15mm - 4Nm max torque - For water bottle cages only. - Never use these aluminum bolts in a structural application.

- Christophe Vintage leather strap - Celebrating 130 years of history - 370mm long - Metal buckle

E-bike compatible mirror. Ideal for urban or leisure. The Espion Z56 mirror has a sturdy stem made from a reinforced fiberglass composite material and it can be fixed to the handlebars. This bar-end mirror has the largest mirror on the market. - 56cm² reflective surface - Ideal for urban or leisure use - E-bike friendly - Made from unbreakable ABS chrome - Double adjustment at 360 degrees to tailor the orientation to your position - Foldable for storage and protection of the mirror

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

Nylon beaded cable ties - 8-inch - Reusable

The buyer's choice for wheel builders looking to save weight. ProLock nipples contain a special adhesive compound (by Loctite) which is activated when a spoke is threaded into the nipple, forming a durable bond. - Weight: starting at 20g for 64 nipples

Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket • Sold singly or in pairs

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

- Aheadset preload adjusting bolt

This is a single replacement pin for Park Tool HCW-4 and SPA-6 pin spanner wrenches.

Her' Chamois Butt’r was developed by a female sports medicine physician in cooperation with professional women cyclists. It's a non-greasy skin lubricant that improves your riding comfort by preventing rubbing and chafing. Her' utilizes premium ingredients including aloe vera, green tea leaf extract, tea tree oil, shea butter and lavender oil for their naturally occurring beneficial properties. It's safe for use on even the most delicate fabrics and it washes right off the skin and out of shorts easily with soap and water. - To use: rub 1/6 to 1/3 ounce on your skin or chamois - No gluten, paraben, fragrance or artificial color - Meets the FDA’s Good Manufacturing Practices - No animal testing utilized

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

Service parts for Fox suspension.